Table of Contents
Advertisement
Other Precautions
The camera and stand are made of precision components. Failure to observe the following
precautions can result in inability to correctly save data and malfunction.
G Never use or store the camera and stand in the following locations. Doing so creates
the risk of malfunction of and damage to the camera and stand.
• Locations subjected to electrostatic charge
• Locations subjected to temperature extremes
(Operating Temperature Range: 5ºC to 35ºC/41ºF
to 95ºF)
• Locations where there is extreme moisture
• Locations subjected to sudden temperature
changes
• Locations where there is a lot of dust
• On a shaky, uneven, or otherwise unstable surface
• Locations where there is the chance of the
camera getting wet
• Locations exposed to direct sunlight
• Locations subjected to vibration or impact (Avoid
areas near the engine of a motor vehicle, boat,
etc.)
• Near high-voltage power lines, transformers, or
motors (which generate electrical interference that
can cause problems with system operation)
G Avoid using the system under the following conditions. Such conditions create the
risk of malfunction of and damage to system components.
• Never place heavy objects on any of the system
components.
• Never insert or allow foreign objects to drop into
system components.
• Never place a vase or any other container of
water on top of system components.
G Clean with a soft, dry cloth.
When very dirty, use a soft cloth that has been dampened in a weak solution of water and a
mild neutral detergent. Wring all excess water from the cloth before wiping. Never use thinner,
benzene, or any other volatile agent to clean system components. Doing so can remove
markings and stain case finishes.
• Always fold up the stand before moving it. Do not subject the stand to strong impact.
• When it comes time to dispose of the stand and/or camera, make sure you do so in
accordance with all of the local rules and regulations that apply.
Operating Precautions
U
E-7
Advertisement
Table of Contents
