Casio YC-400 - 2 User Manual page 20

Setting Up the Multi PJ Camera System
Connecting the AC Adaptor to the PJ Camera Stand
Use only the AC adaptor that comes bundled with the Multi PJ Camera System to power it.
When the AC adaptor is connected to the PJ Camera Stand, the battery of the PJ Camera
mounted on the stand charges while the camera is turned off. Charging is indicated when the
[CHARGE] indicator is lit.
Operating the PJ Camera on battery power without connecting the AC adaptor to the PJ
Camera Stand can run down battery and so projection becomes impossible.
Removing the PJ Camera from the PJ Camera Stand
After making sure that the PJ Camera is turned off, slide the [CAMERA RELEASE] and remove the
camera from the stand.
1
E-20
2
Take care to avoid dropping the
camera when removing it from the
stand.
To protect against accidentally
dropping the camera, make sure
to have the strap around your
fingers when removing the camera
from the stand.