Casio YC-400 - 2 User Manual page 31

3.
Use the scanner window to configure PJ Camera settings.
To change the zoom setting, click the [Wide] or [Tele] button. You can select a zoom factor in
the range of 1X to 3X. The initial default zoom setting is 1X.
To adjust focus, display the operation bar and then select [Camera] and then [Refocus], or
press the computer keyboard's [F2] function key. If the currently selected zoom factor is larger
than 1.8X when you press the [F2] function key, it will change to 1.8X.
You can also focus manually using the four buttons to the right of the [Refocus] button.
To do this:
Make a relatively large change in the focus setting
Make a fine adjustment of the focus setting
4.
When you are ready to start auto scanning, click the [Start] button on the scanner
window.
This causes the [Start] button to change to a [Stop] button, and starts auto scanning.
An image of the document you placed onto the document stage in step 2 is recorded
automatically, and a preview image box appears. The preview image box will close
automatically after a few seconds.
After an image file of the scanned document is created, its thumbnail is added at the top of
the preview list area.
5.
After confirming that the preview image box of the previous image is no longer displayed,
replace the document on the document stage with the next one you want to scan.
Scanning is performed each time you replace the current document with another one. After
the preview image box appears, the thumbnail of the new document is added to the top of
the preview list area.
Repeat step 5 to record all of the pages that you want.
6.
When you are finished auto scanning, click the [Stop] button on the scanner window.
This causes the [Stop] button to change back to a [Start] button, and stops auto scanning.
7.
To quit scanning, display the operation bar and then select [Exit] on the [File] menu.
This exits PJ Camera Software and turns off the PJ Camera.
Using Files Created in the Scanner Mode
You can use image files you create in the Scanner Mode for projection in the Scanner Mode or the
PC Image Mode. See the following section for details about projecting image files stored on the
computer (PC Image Mode).
PJ Camera Software Overview and Basic Operations
Click this button:
[<<] or [>>]
[<] or [>]
E-31