Cisco SR520-FE-K9 Administration Manual page 198

Administration Settings
Remote Management
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)
Click Submit to save your settings.
TR-069 Settings
Field
Status
ACS URL
ACS Username
ACS Password
Connection Request
URL
Connection Request
Username
Connection Request
Password
Periodic Inform
Interval
Periodic Inform
Enable
Description
Select Enabled to allow auto-configuration of your
router from a central server. The default is Disabled.
Enter the ACS URL provided by your service provider.
The ACS URL uses the following format:
Protocol://host:port/path
•
Protocol can be either http or https.
•
Host can be a fully qualified domain name, or IP address.
•
Port is optional.
•
Path is defined by the ACS.
The username for ACS. The default username is OUI-
Serial Number. This username must match the ACS
server username.
The password for ACS. This password must match the
ACS server username.
This field is automatically populated. The format is http:/
/xxx.xxx.xxx.xxx:port. The x's represent the WAN IP
address of the SRP.
This username must match the ACS server username.
This password must match the ACS server username.
Specify the interval (in seconds) at which the SRP will
initiate connections to the ACS. The default value is
86400 seconds (24 hours).
Select Enabled to allow the router to periodically initiate
connections to the ACS. Otherwise, select Disabled.
8
198