Consolidation; X/Z Consolidation; Consolidation Processing - Casio CE-7000 Dealer's Manual

Consolidation

X/Z consolidation

This is used when it is desirable to obtain the counters and totals of all terminals in the store.
After consolidating data from all specified terminals, the master prints the details on the receipt/journal printer.
First of all, allocate the appropriate consolidation files and program the terminal connection table.
During the X consolidation, the satellite terminals send data and do not print out the reports. But, during the Z consolida-
tion, satellites are locked from registrations, and reports can be printed out on the receipt/journal of a terminal in accor-
dance with the program. Also, you can program the behavior of the master, when the satellite does not respond for the first
polling (refer to the address 13 of the general function program).
X consolidation processing
X consolidation processing is performed as the figure shown below.
1 An X consolidation command is started up from the master terminal.
2 Data of the master's terminal file are copied to the consolidation file, if the master is included in the target terminal.
3 Data of the satellite's terminal file are sent to the master terminal, and are added to the consolidation file.
4 The same process described in step 3 is executed for other terminal.
5 After the above consolidation processing is completed for all target terminals, the data are reported on the master's R/J
printer.
CE-7000/TK-7000/TK-7500/TK-T500/TK-6000/TK-6500 Dealer's Manual
1
Satellite
Terminal
files
2
3
Master
Terminal
5
files
Consolidation
files
175