Table of Contents
Advertisement
Cisco 1000 Series Lightweight Access Point Placement Guidelines
Collecting Maps or Building Floor Plans
Collect maps or building plans of the areas to be covered, with a feet or meters scale included.
Figure 8
Noting Deployment Constraints
If the Cisco 1000 series lightweight access points are to use existing wiring, note these locations on the
map.
If there are locations where Cisco 1000 series lightweight access points cannot be placed, note these
locations on the map.
Access Point Placement Guidelines
•
•
•
Deployment Guide: Cisco Aironet 1000 Series Lightweight Access Points
18
Typical Floor Plan -- Open Auditorium with Cubicles
Position the Cisco 1000 series lightweight access points above obstructions.
Position the Cisco 1000 series lightweight access points vertically near the ceiling in the center of
each coverage area, if possible.
Position Cisco 1000 series lightweight access points in locations where users are expected to be. For
example, large rooms are typically a better location for Cisco 1000 series lightweight access points
than a hallway.
Deployment
78-17279-01
Advertisement
Table of Contents
