Verifying Rf Coverage Using The Site Survey Tool; Cisco 1000 Series Lightweight Access Point Placement Guidelines - Cisco CISCO1004-CH - 1004 Enet/ISDN/Bri Rter Deployment Manual

Deployment
•

Verifying RF Coverage Using the Site Survey Tool

•
•
Cisco 1000 Series Lightweight Access Point Placement
Guidelines
This step describes where and how Cisco 1000 series lightweight access points should be placed. You
must know certain information to select Cisco 1000 series lightweight access point locations:
•
•
•
•
78-17279-01
If any power is being applied to the Cisco 1000 series lightweight access point, remove the power
now.
Follow the manufacturer's instructions supplied with the Site Survey Tool to collect signal strength
information from the coverage area being tested.
If necessary, reposition the Cisco 1000 series lightweight access point(s) in the coverage area and
repeat the previous steps until you have verified coverage, and then continue.
Collecting Maps or Building Floor Plans
Noting Deployment Constraints
Access Point Placement Guidelines
Cisco 1000 Series Lightweight Access Point Placement

Cisco 1000 Series Lightweight Access Point Placement Guidelines

Deployment Guide: Cisco Aironet 1000 Series Lightweight Access Points
17