Configuration For Router Only On Isdn Line; Configuration For Router And One Additional Device On Isdn Line - Cisco 761M Installation Manual

Configuration for Router Only on ISDN Line

Table C-10 lists the router configuration requirements when using the router only on a
Northern Telecom DMS-100 ISDN line.
Table C-10
Parameter
Router software
Switch type
SPIDs
Directory number
1 This parameter is not set with a software command.

Configuration for Router and One Additional Device on ISDN Line

Table C-11 lists the router configuration requirements for using a Northern Telecom
DMS-100 switch when using the router and one additional device on the ISDN line.
Note
Table C-11
Parameter
Router software
Switch type
SPIDs
Directory number
1 This parameter is not set with a software command.
Northern Telecom DMS-100—Router Only
In this configuration, the router can use only one B channel.
Northern Telecom DMS-100—Router and One Additional
Device
Configuration
U.S. version
DMS
Two required
Two required
Configuration
U.S. version
DMS
One required
One required
Provisioning the ISDN BRI Line C-13
Software Command
1
Note
set switch
set spid
set directory number
Software Command
1
Note
set switch
set spid
set directory number