Preparing To Install The Router; Safety Recommendations - Cisco 2611 - Router - EN User Manual

Preparing to Install the Router

This chapter describes important information to consider before you begin to install a
Cisco 2600 series router, and includes the following sections:
•
Safety Recommendations on page 2-1
•
General Site Requirements on page 2-4
•
Preparing to Connect to a Network on page 2-7
After you have completed this chapter, proceed to Chapter 3 "Installing the Router" for
installation instructions.

Safety Recommendations

Follow these guidelines to ensure general safety:
•
Keep the chassis area clear and dust-free during and after installation.
•
Put the removed chassis cover in a safe place.
•
Keep tools away from walk areas where you and others could fall over them.
•
Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf
and roll up your sleeves.
•
Wear safety glasses if you are working under any conditions that might be hazardous to
your eyes.
•
Do not perform any action that creates a potential hazard to people or makes the
equipment unsafe.
C H A P T E R
Preparing to Install the Router 2-1
2