Cisco 2611 - Router - EN User Manual page 14

EN55022/FCC Class B Compliance
EN55022/FCC Class B Compliance
The equipment described in this document generates and may radiate radio-frequency
energy. If it is not installed in accordance with Cisco's installation instructions, it may cause
interference with radio and television reception. This equipment has been tested and found
to comply with the limits for a Class B digital device in accordance with the specifications
in part 15 of the FCC rules. These specifications are designed to provide reasonable
protection against such interference in a residential installation. However, there is no
guarantee that interference will not occur in a particular installation.
You can determine whether your equipment is causing interference by turning it off. If the
interference stops, it was probably caused by the Cisco equipment or one of its peripheral
devices. If the equipment causes interference to radio or television reception, try to correct
the interference by using one or more of the following measures:
•
Turn the television or radio antenna until the interference stops.
•
Move the equipment to one side or the other of the television or radio.
•
Move the equipment farther away from the television or radio.
•
Plug the equipment into an outlet that is on a different circuit from the television or
radio. (That is, make certain the equipment and the television or radio are on circuits
controlled by different circuit breakers or fuses.)
Modifications to this product not authorized by Cisco Systems, Inc. could void the FCC
approval and negate your authority to operate the product.
1-6 Book Title