Using The Management Interface - Cisco SRP521W Administration Manual

Setting up the Interfaces of the Services Ready Platform

Using the Management Interface

Using the Management Interface
STEP 1
STEP 2
STEP 3
STEP 4
Services Ready Platform SRP 500 Series Administration Guide
Field
WMM Support
No
Acknowledgement
The Management Interface is set on this page. It allows two loopback interfaces.
Click Interface Setup on the tab and then click Management Interface in the
navigation pane. The Management Interface page appears.
Click on the loopback icon to change the IP address and subnet mask for each
loopback interface. The Management Interface page opens.
Enter the IP Address and Subnet Mask for each interface.
Click Submit to save your settings.
Description
If you have other devices on your network that support
WMM Support, select Enabled.
Select Enabled to disable the acknowledgement
feature, so the Services Ready Platform will not resend
data if an error occurs. Otherwise, use the default
setting, Disabled.
4
76