Default Settings - D-Link AirPlus DWL-810+ Owner's Manual

Connections
Ethernet Port – this RJ-45 Auto
MDI/MDIX port provides
connection to a network device
using a Cat 5 Ethernet cable.
(The auto MDI/MDIX port
accommodates either Straight-
Through or Cross-Over cable and
is auto-sensing.)
Reset Button – press this button to revert to the factory default settings of
the DWL-810+
Power Receptor – connect one end of the 5V DC Power Adapter (included)
to the power receptor on the DWL-810+ and connect the other end of the
Power Adapter to a power outlet.
Category 5 is the most reliable grade of twisted-pair cable. It is available as
either Straight-Through cable or Cross-Over cable. Always check your
installation instructions to make sure that you have selected the correct type of
Category 5 cable for your other networking devices. The DWL-810+ will accept
either kind of cable and will automatically sense the cable that you are using.

Default Settings

Operating Mode
SSID
Channel
Transmission rates
Encryption
IP Address
IP Subnet
User Name
Password
Reset Button
Power Receptor
Ethernet Port
Infrastructure
default
6
Auto
Disabled
192.168.0.30
255.255.255.0
admin (all lower case)
None (leave field blank)
6