Page 2
Connecting the DWL-810+ to your Ethernet-enabled device First, connect the power adapter to the receptor at the back panel of the DWL-810+ and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation. Insert one end of an Ethernet cable (included) to the Ethernet port on the back panel of the DWL-810+ and connect the other end to the Ethernet port located on the device (e.g., a Set Top Box, Gaming Console, laptop or desktop com-...
Page 3
Connecting the DWL-810+ in Infrastructure Mode Setup #1 Connect an Ethernet cable from the DWL-810+ to your Ethernet enabled: Desktop PC, Laptop PC, Set-Top-Box, or Gaming Console.
Connecting the DWL-810+ in Ad-Hoc Mode Setup #2 Web-based Configuration Before You Begin the Configuration • It’s best to use a computer (with an Ethernet adapter) that is connected to a switch for (Note: You also have the option of connecting the DWL- configuring the DWL-810+.
Page 5
Continued... The logon pop-up screen will appear. Type “admin” for the username and leave the password field blank. Click Once you have logged in, the Home screen will appear. Click Run Wizard You will see the following screens. Click Next...
Page 6
Continued... Step 1 - Set up your new password. You have the option to establish a password. Click Next Step 2 Wireless Setup The default wireless settings are: SSID = default Channel = 6 Operating Mode = Infrastructure Click Site Survey to select a wireless network or you can change the settings manually to match an existing wireless network.
Page 7
Click Restart Click Close You have completed the Configuration of the DWL-810+!
Page 8
Appendix Assigning a Static IP Address in Windows To assign a Static IP Address to the laptop or computer that you are using to configure the DWL-810+, please do the following: Note: The following screens are taken using Windows XP. Your screens may look similar. Go to Start >...
Page 9
Apple Macintosh OS X: Go to the Apple Menu Click Network and Select System Preferences Click on Network Select Built in Ethernet in the Show pull-down menu Select Using DHCP the Configuration pull- down menu The IP address information, the Subnet Mask, the Router’s IP address and the Ethernet adapter address will appear Click on...
Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site or by phone.