Web Configuration - D-Link AirPlus DWL-810+ Owner's Manual

5.

Web Configuration

Before using the Web Configuration for the DWL-810+, please consider the
following:
You will need a JavaScript-enabled web-browser such as the Internet
Explorer 6.0 or later, or the Netscape Navigator 6.0 or later.
The computer that you are using for initial configuration must have
an IP Address within the same range as the IP Address of the DWL-
810+. The DWL-810+ has a default IP Address of
subnet mask of 255.255.255.0
You will need to assign a Static IP Address to the computer that you are
using to configure the DWL-810+, within the IP Address Range of the
DWL-810+. For example, you can assign a Static IP address of
192.168.0.2 with a subnet mask of 255.255.255.0 (Please refer to the
Appendix section of the Quick Installation Guide.)
Factory Default Settings for the DWL-810+
Operating Mode
SSID
Channel
Transmission rates
Encryption
Administrator password
IP Address mode
IP Address
IP Subnet
username
192.168.0.30
Infrastructure
default
6
Auto
No
Blank (no password needed)
Static
192.168.0.30
255.255.255.0
admin (all lower case)
12
with a