Novell Netware 6.X - D-Link DGE-550SX User Manual

D-link user's guide pci-x 1000base-sx network adapter dge-550sx
Hide thumbs Also See for DGE-550SX:
Table of Contents

Advertisement

The message "Do you want to copy driver <driver name>.LAN?" is
displayed.
8.
To copy the driver to the server, select Y
If an older version of a D-Link driver is installed on the system, the messages
"Save existing file SYS:SYSTEM\<driver name.LAN?" and "Save
existing file SYS:SYSTEM\<driver name>.LDI?" are displayed.
9.
To continue, select the desired options (Y
If you selected Y
played.
If you selected N
In any case, the menu "Board M4CXNW_1 (Driver <driver name>) Actions" is dis-
played.
10. Select S
ELECT
11. Configure the protocols to be used.
12. Configure the parameters, e.g. "slot number".
13. After the parameters have been configured, select S
D
.
RIVER
The driver is loaded.
14. If desired, change the network adapter parameters or bindings in the
autoexec.ncf file using the "Nwconfig" tool.

Novell Netware 6.x

To install the network driver on Novell NetWare 6.x, proceed as follows:
1.
After you have installed the network adapter in your computer, boot your NetWare
system.
NetWare detects the new network adapter and tries to install a driver.
2.
To get a list of available drivers, press <Enter>.
3.
The menu "Select a driver" is displayed.
4.
To install an unlisted driver, press <Insert> (the D-Link driver is not listed).
5.
To specify the path to the driver, press <F3>.
The window "Specify a directory path" is displayed.
6.
Type the path to the driver.
If you are installing from CD-ROM, the menu "Select an action" is displayed.
Here, select C
The menu "Select a driver to install" is displayed.
7.
Select the driver for your network adapter.
The driver is now loaded.
8.
Select R
ETURN TO DRIVER
9.
Select C
ONTINUE
10. To configure the protocols to be used, select A
11. Select R
ETURN TO THE DRIVER SUMMARY
12. If desired, change the network adapter parameters or bindings in the
autoexec.ncf file using the "Nwconfig" tool.
, the old driver is written to a predefined location which is dis-
ES
, the old driver is overwritten.
O
M
D
P
ODIFY
RIVER
A
ONTINUE AND
CCESS THE
S
UMMARY
.
.
ES
or N
ES
O
/P
ARAMETERS
ROTOCOLS
CD-ROM.
.
DD
to finish the installation.
- 9 -
).
.
P
AVE
ARAMETERS AND
P
.
ROTOCOL
L
OAD

Advertisement

Table of Contents
loading

Table of Contents