Netware Server - D-Link DGE-500SX User Manual

D-link systems user's guide giga-ether adapter dge-500sx

Table of Contents

6. Click "OK" and Windows NT 4.0 will copy the files from the driver disk.

7. After the file has been copied, click "Properties" and modify the DGE-500SX configuration (see below).

8. Click "OK" after making the configuration setting changes. Windows NT 4.0 will then ask you to reboot the

PC. Select "YES".

9. Restart the computer.

NetWare Server 5.0

The following is for the initial installation from the install menu. Skip this section if it is not your first time

using the install menu.

1. Start the NetWare Server by typing in the following commands:

CD \NWSERVER

SERVER

2. After booting up, type the following command:

NWCONFIG

3. Select "Driver Options"

"Configure network drivers"

"Select a driver" (see below).

Table of Contents