D-Link DGE-500SX User Manual page 10

The NetWare server will now automatically load/bind the driver.
If the driver files have already been copied to your system's Netware directory and you simply wish to load
them:
1. Start the NetWare Server by typing in the following commands:
CD \NWSERVER
SERVER.
2. After booting up, type the following command:
NWCONFIG
3. Select "Driver Options"
4. Select "DLKGE.LAN ...." in the Select a driver windows.
5. Specify "SLOT" and "Node Address" if necessary.
6. Select "Save parameters and load driver" after configuring the adapter settings.
The NetWare server will now automatically load/bind the driver.
Next, you will need to modify your NetWare 5.0 Server's Autoexec file. To do so, please follow these steps:
1. Start the NetWare Server by typing in the following commands:
CD \NWSERVER
SERVER.
2. From the Novell Server side, type the following command:
NWCONFIG
3. Select <NCF files options>.
4. Select <Edit AUTOEXEC.NCF file>.
5. Add the following items into the server's AUTOEXEC.NCF file:
"Configure network drivers" "Select a driver".
9