Table of Contents
Advertisement
Using the DVC-1000 with Routers, Gate-
ways or Broadband Modems (continued)
Opening Ports on Your Routers and Gateways (continued)
How to open ports on a router
A total of 7 ports must be opened for the DVC-1000 to work with most routers
or firewalls. To open these ports, please do the following:
A. Click Enabled
B. Give the Virtual Server a Name (such as i2eye)
C. Under Private IP, enter the IP Address obtained from the
D. Under Protocol Type, choose Both (TCP and UDP)
E. Under Private Port and Public Port, enter 153258
F. Under Schedule, click Always
G. Click Apply to save this entry
A
B
C
D
E
F
DVC-1000
(How to obtain an IP Address from the DVC-1000:
Turn the DVC-1000 ON. Using the remote control
highlight the Settings button on the Main Screen.
Navigate to Settings>Network>Network Address
>IP Address)
153258
153258
G
35
Advertisement
Table of Contents
