Using This Receiver With A Pioneer Plasma; Display - Pioneer VSX-917V-S Operating Instructions Manual

Other connections
Caution
• Make sure you use a parallel (not series,
which are fairly uncommon) connection
when bi-wiring your speakers.
• Don't connect different speakers from the
same terminal in this way.
Using this receiver with a
Pioneer plasma display
If you have a Pioneer plasma display
use an SR+ cable to connect it to this unit and
take advantage of various convenient features,
such as automatic video input switching of the
plasma display when the input is changed.
CONTROL
OUT
DIGITAL OUT
IN AUX
OPT
IN
CD
OPT
2
(TV/ SAT)
IN DVR /
VCR
OPT
1
OUT
(CD)
ASSIGNABLE
DIGITAL IN
TV /
IN SAT
DVD
/LD
ASSIGNABLE
IN FRONT
DIGITAL IN
D V D
COAX
5.1CH
INPUT
2 PLAY
(DVR/VCR)
CD-R
IN
/ TAPE
COAX
/ MD
1
(DVD/LD)
OUT REC
AUDIO L
This receiver
Note
1 This receiver is compatible with all Pioneer plasma displays from 2003 onward.
2 • The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Cus-
tomer Support division for more information on obtaining an SR+ cable (you can also use a commercially available 3-ringed mini
phone plug for the connection).
• If you connect to a Pioneer plasma display using an SR+ cable, you will need to point the remote control at the plasma dis-
play remote sensor to control the receiver. In this case, you won't be able to control the receiver using the remote control if you
switch the plasma display off.
1
, you can
Pioneer plasma

display

FM UNBAL
Ω
75
MONITOR OUT
OUT
R
CONTROL
AM
LOOP
IN
OUT
ANTENNA
VIDEO
DVR /
IN OUT
VCR
IN
TV /
SAT
IN MONITOR
IN
OUT
DVD
SUB
/LD
WOOFER
IN
IN
PREOUT
S-VIDEO
• Use a 3-ringed miniplug SR+ cable
connect the CONTROL IN jack of this receiver
with the CONTROL OUT of your plasma
display.
Before you can use the extra SR+ features,
you need to make a few settings in the
receiver. See SR+ Setup for Pioneer plasma
displays on page 64 for detailed instructions.
VIDEO
Pioneer plasma
INPUT 1
display
DVD player
DVD
AUDIO IN
SAT DVR /VCR VIDEO/FRONT AUDIO
TONE
STANDBY / ON
PHONES
PTY TUNING/ TUNER
SPEAKERS SEARCH STATION EDIT SETUP RETURN
MULTI JOG
This receiver
To make the most of the SR+ features, you
should connect your source components
(DVD player, etc.) in a slightly different way to
that described in this chapter. For each
component, connect the video output directly
to the plasma display, and just connect the
audio (analog and/or digital) to this receiver.
2
to
VIDEO
INPUT 2
Satellite receiver, etc
TV/SAT
AUDIO IN
VSX-917
MULTI JOG
ENTER
DIGITAL PRECISION
PROCESSING
STEREO/ ADVANCED
CD CD-R / TAPE / MD USB FM AM AUX
F.S.SURR STANDARD SURROUND
LISTENING MODE
MASTER
VOLUME
VIDEO INPUT MCACC/
USB
VIDEO L AUDIO R DIGITAL IN AUDIO IN
DOWN UP
11
59
En