Using This Receiver With A Pioneer Plasma Display - Pioneer VSX-C502-S Operating Instruction

Connecting your equipment
03
Using this receiver with a Pioneer
plasma display
If you have a Pioneer plasma display, you can use the
supplied SR+ cable to connect it to this receiver and take
advantage of various convenient features, such as
automatic video input switching of the plasma display
when the input is changed.
CONTROL
OUT
ANTENNA
AM LOOP
TV/SAT
(DVD)
OPT1
VSX-C502
Note
• If you connect to a Pioneer plasma display using the
supplied SR+ cable, you will need to point the
remote control at the plasma display remote sensor
to control the receiver. In this case, you won't be able
to control the receiver using the remote control if you
switch the plasma display off.
• This receiver is compatible with all Pioneer plasma
displays from 2003 onward.
18
En
Pioneer plasma display
VIDEO
FM UNBAL 75Ω OUT
IN
CONTROL
IN IN IN OUT IN
CENTER SURROUND FRONT
L L L
DIGITAL IN
R R R
DVR/VCR DVD
SUB WOOFER
DVD TV/SAT DVR/VCR VIDEO
(TV/SAT)
AUDIO IN (5.1CH)
COAX
OPT2
AUDIO
• Use the supplied 3-ringed miniplug SR+ cable to
connect the CONTROL IN jack of this receiver with
the CONTROL OUT jack of your plasma display.
Before you can use the extra SR+ features, you need to
make a few settings in the receiver. See Making receiver
settings from the System Setup menu on page 34 for
detailed instructions.
STANDBY/ON
MONIT DVD player
OUT
To make the most of the SR+ features, you should
connect your source components (DVD player, etc.) in a
slightly different way to that described in this chapter. For
each component, connect the video output directly to the
plasma display, and just connect the audio (analog and/
or digital) to this receiver.
VIDEO
Pioneer plasma
INPUT 3
display
OPEN/CLOSE
Satellite receiver, etc
DVD
AUDIO IN
AV DIRECT 2 DIGITAL DTS 2 PRO LOGICII 2 PRO LOGICIIX NEO:6 ADVANCED PHONES
STANDBY/ON INPUT SELECTOR
FRONT INPUT
DIGITAL IN VIDEO L AUDIO R
PHONES/SETUP MIC
VSX-C502
VIDEO
INPUT 1
TV/SAT
AUDIO IN
MASTER
VOLUME
DOWN UP