Smeg WO-04 Manual Use And Maintenance page 11

Main water pressure failure
Alarm
P. min
Leakage
Alarm
Leakage
4.4.2 Display pages
WO-04
Mikrotec
Ver 1.02
Manual
Flush.
Flushing
T remain
0000:00
L remain
0000000
T Total
0000:00
L Total
0000000
4.4.3 Programming pages
When the faucet will be closed, the board returns in stand-by mode.
When faucet is opened, if low pressure failure occurs, the display shows "Alarm
P. min" and the board makes a beep.
To restart the machine, turn OFF and ON with the key
If water leakage alarm occurs, the machine stops and makes a continuous beep
displaying "Alarm Leakage".
To restart the machine, turn OFF and ON with the key
When the card is in stand-by mode, the name of the installer is displayed.
Pressing the key displays the version of software installed in the card.
To scroll the next pages press the
carryng out the manual flow of the membrane; in order to carry out the
operation, press the
Pressing the key again moves to the display of the hours-minutes of
remaining functioning before the filter change; from this page, pressing the key
displays the residual autonomy.
Pressing the
running since the last reset; from this page, pressing the
total liters consumed.
key ; the first page displayed enables
key; the card displays "Flow in progress".
key again moves to the display of the hours-minutes of
- 11 -
.
.
key displays the