Chapter-10: Troubleshooting - Smeg SWM126MD User Manual

CHAPTER -10: TROUBLESHOOTING
All repairing operations required for your machine should be carried
out by our authorised service. If your machine requires a repair or if
you cannot remove the fault by the help of the information provided as
follows:
Unplug your machine.
Turn the water faucet off.
Contact the nearest authorised service.
FAULT
Your machine does
not start.
Your machine does
not intake water.
(*) See the chapter regarding maintenance and cleaning of your
machine.
POSSIBLE CAUSE
It is not plugged.
Fuses out of order.
Electricity cut-off.
Start/pause button
not pressed.
Programme knob on
position 0.
The machine door
not completely
closed.
Your faucet turned
off.
Water inlet hose may
be twisted.
Water inlet hose
clogged.
Valve inlet filter
clogged.
The machine door
not completely
closed.
40
REMOVING
METHODS
Plug it.
Replace the fuses.
Check mains power.
Press on start/pause
button.
Switch the
programme knob to
the desired position.
Close the machine
door.
Turn your faucet on.
Check water inlet
hose.
Clean water inlet
hose filters. (*)
Clean the valve inlet
filters. (*)
Close the machine
door.