Miscellaneous Settings; Restoring Default Settings; Software Update - Philips DTR220 User Manual

Transparency
Here you set the transparency of the OSD. If you have dif-
ficulties to read the OSD with transparent setting, select
not any.

Miscellaneous settings

Options here include:
- Time Zone settings
- Audio Format (Mono - Stereo)
This is useful if programs are being broadcasted in multi-
ple languages (right-left channel).
- Dolby settings
- Sorting within channel lists.

Restoring default settings

You can reset the device to default settings. In doing so,
the individually composed favourites list is deleted.
1 Press the MENU key to open the main menu.
2 Highlight the item Box Settings by using the arrow
keys or and press the OK key.
3 Highlight the item Restore Factory Settings and press
the OK key.
4 Set Yes by using the arrow key
key.
The device reboots. It switches off, and shortly afterwards
switches on again.
5 Carry out an initial installation (see page 9).
, and press the OK
Displaying channel and system information /
adjusting the antenna
This function solely serves to supply information on one
channel. However, you can use it for adjusting your
antenna and for improving the television reception.
1 Press the MENU key to open the main menu.
2 Highlight the item Technical Information by using the
arrow keys or , and press the OK key.
3 Select the item Channel Information and press the
OK key.
4 Adjust your antenna so that the two specifications signal
strength and signal quality display a preferably high
value.
Note: Depending on your antenna, you can possibly also carry
out settings on your antenna.
5 Press the EXIT key once and acknowledge the selection
System Information by using the OK key.
Here you find technical information on your device. This
information normally is only relevant with regard to sup-
port.
6 Press the EXIT key twice to return to the TV program.

Software update

Note: For this purpose, the device has to be set to stand-by
operation.
Every night between 1 am and 5 am, the device checks
whether a software update is available. If this is the case,
you'll receive an according message when switching the
receiver on the next time, and you can start the software
update.
You can also start the search process manually.
1 Open the main menu and select the option System
Information from the field Technical Information.
2 Highlight the item Software Update by using the arrow
keys.
3 Press the OK key to start the software update.
U
SING THE
S T B
ET OP OX 15