Troubleshooting; The Diagnostics Programme Cannot Be Accessed - Electrolux 6 Series Service Manual

8 Troubleshooting

8.1 The diagnostics programme cannot be accessed

Are the power cord and connections
functioning?
Y
E
S
Is the anti-disturbance filter that is
integrated into the junction box
functioning correctly?
Y
E
S
Disconnect the general junction
box connector and the
circuit board connector.
Check wire continuity in the closed
circuit between terminals.
Y
E
S
Does the programme selector
dial function mechanically?
Y
E
S
Do the button holders / springs
function mechanically?
Y
E
S
Change the main circuit board and run
the diagnostics programme.
Technical Support - A.D.L.
Change / Reconnect the power cord
NO
and run the diagnostics programme.
Change the junction box with
NO
anti-disturbance filter and run
the diagnostics programme.
Change or reconnect wires and run
the diagnostics programme.
NO
Change or adjust the dial or
NO
the programme selector pin.
Change or adjust the button holders
NO
57/66
or springs.
599 74 32-54 Rev.01