Condensation Water Pump - Electrolux 6 Series Service Manual

6.9.2 Condensation water pump

 Using pliers, loosen and raise the clamp
securing the red pipe (supply) and raise it
a few centimetres.
 Repeat the operation with the transparent
pipe (comes back too full).
 Disconnect the 2 pump connectors and the
level sensor connector.
 Loosen the screw that holds the whole pump
and level sensor to the machine and remove it.
 Insert a screwdriver in the slots indicated by the
arrows and remove the pump by pushing it down.
Technical Support - A.D.L. 37/66 599 74 32-54 Rev.01