ZyXEL Communications P-330W Quick Start Manual page 12

4. The next screen will change depending on the wireless security method you decide to use.
Select None if you do not want to enable any security. This will allow anyone to access your network.
5. Click Finished when done. This will complete the setup wizard. Your P-330W may reboot or pause for several seconds
while activating the settings you entered.
6. For most of the DSL/Cable users after the seup for the P-330W, it is recommended to reboot your
P-330W and DSL/Cable modems to get the Internet access. If you cannot get Internet connected, please call your
broadband ISP (Internet Service Provider) first for the trouble shooting.
7. Change the wireless parameter settings in the wireless stations to match those of the P-330W. Refer to the
Guide
for your wireless adapter if you want to have advanced settings for the WLAN.
ZyXEL P-330W
12
WEP (Wired Equivalent Privacy)
encrypts data frames before transmitting
over the wireless network. The higher
the WEP Encryption, the higher the
security but the slower the throughput.
WEP security should only be used if you
have older devices on your network that
are not compatible with WPA or WPA2.
Select 64-bit or 128-bit from the WEP
Encryption drop-down list.
Select one of the Key's from the pull
down menu to use as the default WEP
key.
Manually enter a key, in either ASCII or
Hex format. At least one key must be
filled in.
WPA Pre-Shared Key
WPA offers a higher level of protection
for your wireless network than WEP.
You can choose to either enter in a Hex
key, or use a passphrase to generate the
pre-shared key. We suggest using a
passphrase.
Enter in a passphrase of at least 8
characters. Your wireless clients will
need to have this passphrase entered in
order to log into the network.
User's