Lenovo ThinkSystem SD550 V3 User Manual page 121

b. Remove the node from the chassis (see
carefully lay the node on a flat, static-protective surface, orienting the node with the front
toward you.
Notes:
• When removing the node, note the node tray number and make sure to install the node in
the same tray from which it was removed. Reinstalling the node into a different tray requires
the node to be reconfigured.
• For safety, make sure to hold the node with both hands when lifting the node.
c. Remove the top cover (see
Step 2. Disconnect the flash power module cable from the CFF RAID adapter.
Step 3. Remove the flash power module from the air baffle.
a. Gently press open the retaining clip.
b. Pivot the flash power module to disengage and remove it from the holder.
Figure 57. Removal of the flash power module
After this task is completed
1. Install a replacement unit (see
"Remove a node from the chassis" on page
"Remove the top cover" on page
"Install a flash power module" on page
203).
112).
.
Chapter 5 Hardware replacement procedures
75); then,
111