7, General Information; Setup; Model Type Setting - Pioneer DVR-5100H-S Service Manual

5 = 6 = 7 =
7. GENERAL INFORMATION
7.1 SET UP
7.1.1 MODEL TYPE SETTING
* The Setup is Necessary When :
a) When the MAIN Assy is replaced
b) When the TUJB Assy is replaced
c) When the MAIN Assy and TUJB Assy are replaced
¢ How to Setup the Model
1) After power on, the following screen is displayed on TV monitor.
Press " 32" by using the remote control unit for service(GGF1381).
[ Recorder's Model Setting]
Input the number by using the remote for Service.
>=
Input No. Model
: DVR-310-S ]
: DVR-510H-S =]
2) After 1), the following screen is displayed on TV monitor.
Press "012 (WY)" or "022 (WV)" by using the remote contro! unit for service.
[ Recorder's Type Setting]
Input the number by using the remote for Service.
> (Type -- , Region No. -)
Input No. Type
[ 01 : WY <Europe>
[ 02 > WV <UK>
The setting complete when OSD is disappeared.
3) Unplug the power cable.
4) Reset the recorder to all its factory settings.
1. Make sure that the recorder is on.
2. Press and hold [STOP] and press [STANDBY/ON] key on the front panel.
The recorder turns off with all settings reset.
5) Enter the Service Mode and then confirm the Model Name " DVR-510H-S/Ws ".
1. Make sure that the recorder is on.
2. Press [ESC] then [DISP] keys by using the remote control unit for Service.
DVR-510H-S/ W«
SYSCON_ : 2.00
ComRev : 1.1140.2.6 $
FirmRev : 1.2834.2.4 $
AppRev : 1.3873.2.8 $
TUFLCON : 2.18 F
DRIVE : DVD-RW DVR-106
1.01L
CBT0900720WL
HDD : --
DEVICE : PRISM=ES 2.0C
REGION : 2
C 1 keke RH EERE
Notes :
1) After the setting complete, you can NOT CLEAR the seting data.
Make sure the pressing number.
2)" NG" is appeared on TV when unsuitable number is pressed.
In such a case, please unplug the power cable and plug it again. Then restart the model setting.
73