Table of Contents
Advertisement
5.
™
6
a
7
-
8
7.2.4 SETTINGS FOR SPECIFIC AREAS
How to exit setting modes: Press the ESC key. The setting mode is exited, the OSD disappears.
1. General Setting mode
[General Setting mode] (#2)
AVIO Specific Area Mode
Input - [ TUNER ]
Syne AGC
: ON
+
Threshold
; Manuat Threshold Level
Threshold Level
: 0
#
] * : setting is the default.
Table 1: Key operations in General Setting mode (effective only during recording/playback stop}
Operation
Setting (*: Default)
INPUT SELECT,
CHANNEL +/—
Switches inpuis or charmeis.
(eR)
4x3, x3 & (#1)
Sets Syne AGC.
ON (+) / OFF
{*) Normal
Auto Threshold Level
Manual Threshold Level
Pedestal Level
|
According to the setting of Threshold,
the values can be changed within the
range mentioned below.
tad CHAPTER SKIP,
.
CHAPTER SKIP mi
| Sets Threshold.
(*1)
:
* Normal:
<a STILL STEP,
The value is fixed, with no display of
STILL STEP >
the value.
(#1)
Sets Threshold level.
+ Auto Threshold Level:
The value can be changed with the
0-8 (Default: 0}
411 or 11> key.
« Manual Threshold Level:
The value can be changed with the
0-8 (Defauit: 0}
atl or I> key.
_|+ Pedestal Level:
;
The value can be changed with the
0-8 (Default: 0)
~<a or 1» key.
oo
the key resets all settings
ee
;
of
General Setting
mode to the
CLEAR (#1)
Initializes the setting of General
initial values. Satinge of Specific
Setting mode.
Channel Satting mode are not
affected (they are retained).
Exits AVIO setting for specific areas,
clearing the OSD.
93
Advertisement
Table of Contents
