Rear Wheel - Yamaha AG200FED 2012 Owner's Manual

8. Adjust the brake lever free play.
(See page 7-18.)
9. Slide the rubber cover back to its
original position.
PERIODIC MAINTENANCE AND ADJUSTMENT

Rear wheel

To remove the rear wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Disconnect the brake torque rod
from the brake shoe plate by re-
moving the brake torque rod cotter
pin, the nut, and the bolt.
4
1. Brake torque rod
2. Brake torque rod nut
3. Brake torque rod bolt
4. Brake torque rod cotter pin
2. Remove the brake pedal free play
7-34
EAU25080 adjusting nut, and then disconnect
the brake rod from the brake cam-
shaft lever.
EAU49022
EWA10821
4
3
2
1
1. Wheel axle
2. Drive chain slack adjusting plate
3. Brake camshaft lever
4. Brake pedal free play adjusting nut
5. Brake rod
3. Loosen the axle nut and the rear
1
sprocket nut.
2
3
2
5
3
4
5
6
7
8
9