Table of Contents
Advertisement
TRANSPORTING BY ROAD
Before transporting the machine on public roads, be sure to
first research understand and follow all local regulations.
• When transporting the machine using a trailer check the
width, height, length, and weight of the trailer with the
machine loaded. Note that the transportation weight and
dimensions may vary depending on the type of shoes
or arm installed. Refer to the mass (weight) shown in the
Assembly/Disassembly section. Be sure that the transpor-
tation weight and dimensions do not exceed the limits
specified in the local regulations concerned.
• Investigate beforehand the conditions of the route to be
traveled, such as dimension limits, weight limits and traf-
fic regulations. In some cases, disassembly of the machine
may be required to bring it within dimensional limits and/
or weight limit of local regulations or for getting trans-
portation permission from the local government office.
Remove the boom, arm, counterweight, and/or cab stand
as required when transporting this machine.
TRANSPORTING BY TRAILER
Be sure that the transportation weight and dimensions do not
exceed the limits specified in the local regulations concerned.
Investigate beforehand the conditions of the route to be trav-
eled, such as dimension limits, weight limits and traffic regula-
tions. In some cases, disassembly of the machine may be re-
quired to bring it within dimensional limits and/or weight limit
of local regulations or for getting transportation permission
from the local government office.
TRANSPOTATION
7-1
Advertisement
Table of Contents
