Table of Contents
Advertisement
INVESTIGATE JOB SITE BEFOREHAND
• When working at the soft ground, on the unstable place
such as the clippings or on a road shoulder, the machine
could tip over, possibly resulting in serious injury or death.
• Investigate the configuration and ground conditions of
the job site beforehand to prevent the machine from fall-
ing and to prevent the ground, stockpiles, or banks from
collapsing.
• Make a work plan. Use machines appropriate to the work
and job site.
• Reinforce ground, edges, and road shoulders as necessary.
Keep the machine well back from the edges of excava-
tions and road shoulders.
• When working on an incline or on a road shoulder, em-
ploy a signal person as required.
• Confirm that your machine is equipped a FOPS cab before
working in areas where the possibility of falling stones or
debris exist.
• When the footing is weak, reinforce the ground before
starting work.
• When working on frozen ground, be extremely alert. As
ambient temperatures rise, footing becomes loose and
slippery.
• Beware the possibility of fire when operating the machine
near flammable objects such as dry grass.
• Make sure the worksite has sufficient strength to firmly sup-
port the machine.
When working close to an excavation or at road shoulders,
operate the machine with the tracks positioned perpendicu-
lar to the cliff face with travel motors at the rear, so that the
machine can more easily evacuate if the cliff face collapses.
• If working on the bottom of a cliff or a high bank is required,
be sure to investigate the area first and confirm that no dan-
ger of the cliff or bank collapsing exists. If any possibility of
cliff or bank collapsing exists, do not work on the area.
• Soft ground may collapse when operating the machine on
it, possibly causing the machine to tip over. When working
on a soft ground is required, be sure to reinforce the ground
first using large pieces of steel plates strong and firm
enough to easily support the machine.
• Note that there is always a possibility of machine tipping
over when working on rough terrain or on slopes. Prevent
machine tipping over from occurring. When operating on
rough terrain or on slopes:
• Reduce the engine speed.
• Select slow travel speed mode.
• Operate the machine slowly and be cautious with ma-
chine movements.
SAFETY
S-9
SA-380
Advertisement
Table of Contents
