Switching Taskbars - Sony MKS-X1115 User Manual

Live production processor system
Table of Contents

Advertisement

For details, see "Returning parameters to the initial
settings" (page 78).
• You can initialize a key setting values using buttons in
the key control block.
For details, see "Initializing Key Settings" (page 140).
• You can initialize switcher bank and two-dimensional
transform (resizer) setting values using buttons in the
device control block.
For details, see "Reducing, enlarging, moving, and
rotating keys (device control block)" (page 141).
• You can initialize three-dimensional transform (DME)
setting values using buttons in the device control block
or the menu.
For details, see "Three-Dimensional Transform
Operations (Device Control Block)" (page 202) and
"Three-Dimensional Transform Operations (Menu)"
(page 205).
Default recall button
1
Press the [Default Recall] button.
2
Check the message, then press [OK].
The menus below the selected level 3 menu return to
their initial settings.
Note
In the case where a level 3 menu does not exist, the
menus below the level 2 menu return to their initial
settings.
Default recall target menus
• Home > M/E-x > Keyx menus
• Home > M/E-x Sub > Keyx menus
• Home > P/P > Keyx menus
• Home > P/P Sub > Keyx menus
(M/E-x = M/E-1 to M/E-5, Keyx = Key1 to Key8)
When default recall is executed, all the menus below the
level 3 menu return to their initial settings.
However, the settings in the following lower level menus
are not affected by default recall.
• Type > Type Select menu > [Video Process] button
settings
• Type > Type Select menu > [Key Source] group
settings
• Type > Chroma Adjust menu > [Sample Mark] button
parameter settings
• Type > Chroma Adjust menu > [Sample Mark] button
on/off settings (turned off after default recall is
executed)
• Type > Signal Select menu settings
• Transition > Transition Type menu settings
• Transition > DME Wipe menu settings
• Transition > 1ch Pattern menu settings
• Transition > 2ch Pattern menu settings
• SL Key menu settings
• Key Snapshot menu settings

Switching Taskbars

You can switch between five types of taskbar to display
in the taskbar area.
Taskbar selection button
Press the taskbar selection button in the taskbar area and
select a taskbar from the pull-down list.
The taskbar area switches to the selected taskbar display.
Types of taskbar
[Favorites] taskbar
Displays shortcuts for registered menus.
For details, see "Registering Menus as Favorites"
(page 80).
[Effect Timeline Recall/Store] taskbar
Displays operation buttons for recalling/saving effect
timeline registers and for executing an effect timeline.
[Effect Timeline Edit] taskbar
Displays operation buttons for creating and editing an
effect timeline.
[Macro Edit] taskbar
Displays operation buttons for editing macros.
[Snapshot] taskbar
Displays operation buttons for recalling/saving snapshot
registers.
79

Advertisement

Table of Contents
loading

Table of Contents