Midi Data Format; Midi Receive - Yamaha VL Supplementary Manual

MIDI Data Format for VL1, VL1-m, VL7 Version 2

1 MIDI receive

MIDI
Note : <Rch> : MIDI receive channel switch
<Dev No> : Device number switch
n : MIDI channel
m : Device number
Ignores the third byte of Note Off.
Ignores the second byte of Pitch Bend.
No incoming MIDI signals will be recognized in Demo mode.
2 MIDI transmit
[for VL1, VL7]
12

MIDI Data Format

<Rch>
<Rch>
<Rch>
<Rch>
<Rch>
<Rch>
<Rch>
<Dev No>
<Dev No>
<Dev No>
Note On/Off $9n ...
Modulation Wheel 1 $Bn $01 ...
Continuous Slider 1 $Bn $10 ...
Continuous Slider 2 $Bn $11 ...
Breath Controller $Bn $01~$1F, $21~$77 ...
Modulation Wheel 2
and Foot Controller 1,2
Foot Switch 1,2 $Bn $01~$1F, $21~$77 ...
$Cn ...
Program Change $Cn ...
Aftertouch $Dn ...
Pitch Bend Wheel $En ...
and Octave Switch
Universal Bulk Dump $F0 $43 $0m $7A ...
With Additional Header
Parameter Change $F0 $43 $1m ...
Active Sensing $FE
Voice Lists
$8n ... Note Off
$9n ... None On
$Bn $01~$1F ... Control Change
$Bn $21~$77 ...
$Bn $79 $00 Reset All Controllers
$Cn ... Program Change
$Dn ... Channel Aftertouch
$En ... Pitch Bend
$F0 $43 $0m $7A ... Universal Bulk Dump With Additional Header
$F0 $43 $1m... Parameter Change
$F0 $43 $2m... Bulk Dump Request
$FE Active Sensing
The Voice number changes according to received Program Changes.
VL1,1-m : $00 ~ $7F
VL7 : $00 ~ $3F
Reception may not be possible if Memory protect is ON in Bulk Dump.
Details of System Exclusive Messages are given later.
While Active Sensing is on, if no MIDI Active Sensing signals are received for
more than around 330 msec, the MIDI receive buffer will be cleared, and any
sound being generated will be cut off.
Program Change data Voice number
A01(001) ~ H16(128)
A01(001) ~ D16(064)
$40 ~ $7F A01(001) ~ D16(064)
<Tch>
<Tch>
<Tch>
<Tch>
<on/off> <Tch>
<on/off> <Tch>
<Tch>
<Tch>
<Tch>
<Dev No>
<Dev No>
MIDI