MIDI Pages
MIDI settings are made on the MIDI pages shown below.
2-ch mode
2-ch x2 mode
Setting the MIDI Receive Channels
The MIDI Channel used to receive MIDI Program Change and Control Change mes-
sages is set on the MIDI page. There are two MIDI Channel settings in 2-channel x2
mode, one for A and one for B.
Use the [UTILITY] button to locate the MIDI page.
1
Use the cursor buttons to select the CH parameter in the MIDI RECEIVE CHAN-
2
NEL section of the page.
Use the DATA wheel or [–1/DEC] and [+1/INC] buttons to select a MIDI Chan-
3
nel from 1 through 16 or OFF.
When OFF is selected, the SREV1 ignores received MIDI messages.
MIDI Pages
4-ch mode
SREV1—Owner's Manual
69