Working With Quick Memories - Yamaha S Rev1 Owner's Manual

42
Chapter 4—Basic Operation

Working with Quick Memories

This section explains how to recall, store, title, and protect programs in Quick memory.
All these operations are carried out on the Program pages shown below. In 2-channel
x2 mode, two Program pages are available: Program-A and Program-B. There are six
Quick memories available in 2-channel or 4-channel mode (P01–P06); 12 in 2-channel
x2 mode (P01–P12). In the program list, a dotted box highlights the selected program.
2-ch mode
2-ch x2 mode—A
Recalling Programs
Programs stored in Quick memories can be recalled instantly. The recalled program
becomes the current program.
Use the [PROGRAM] button to locate the Program page.
1
Use the DATA wheel or the [–1/DEC] and [+1/INC] buttons to select a program
2
from the list.
Use the cursor buttons to select the RECALL button, and then press [ENTER].
3
If the current program contains unsaved changes, a warning message appears. Select
YES to discard the changes and recall the selected program, or select NO to cancel the
operation.
The selected program is recalled and its number and title appear on the display.
In 2-channel x2 mode, when a program is recalled for reverberator A, reverberator B is
muted, unless the optional DB-SREV1 Expansion Board is installed.
SREV1—Owner's Manual
4-ch mode
2-ch x2 mode—B