Metering - Yamaha S Rev1 Owner's Manual

Metering

Input and output signal levels can be metered in several places: the 14-segment meters
on the RC-SREV1 display pages, the 11-segment meters on the Meter I/O page, the
SIGNAL and CLIP indicators on the SREV1, and the CLIP indicators on the
RC-SREV1. The Peak Hold function works with all of these meters. See "Using Peak
Hold" on page 39 for more information.
14-segment Meters
Input and output signal levels can be metered by using the 14-segment meters that
appear on most RC-SREV1 display pages. In 2-channel mode, input and output signal
levels can be metered simultaneously. In 4-channel or 2-channel x2 mode, however,
either the input or output levels can be metered, not both simultaneously. See "Setting
the Meter Mode" on page 39 for more information.
The 14-segment LCD meters have the following resolution: CLIP / –3dB / –6dB / –9dB
/ –12dB / –15dB / –18dB / –24dB / –30dB / –36dB / –42dB / –48dB / –54dB / –60dB.
The following table shows how the input and output meters appear in each mode.
Mode 2-channel
Meter
INPUT &
I/O
OUTPUT
Channels
Left, right
4-channel
OUTPUT
INPUT
Use the METER MODE option on the Meter I/O page to switch
between OUTPUT and INPUT (see page 39).
Front-left, front-right,
rear-left, rear-right

Metering

2-channel x2
OUTPUT
INPUT
A-left, A-right, B-left, B-right
SREV1—Owner's Manual
37