Oven - AEG COMPETENCE 310 B Instruction Book

RP4-5 5/90 GB/UK - RP11 2/90 GB/UK - RP8-2 12/89 GB/UK
Do not use any detergents, abrasives or oven cleaners on
catalytic liners.
It should not normally be necessary to clean the catalytic roof in
water. If you feel you would like to do so, take out the roof and
wash in warm, soapy water, followed by rinsing in clear
water.
lf your. oven has a catalytic roof, sides and back panel either as
standard equipment or if you have bought these parts separately
and fitted them, then the following information will be of interest to
YOU.
The liners.help to keep the oven cleaner as they clean themselves
to a great extent during roasting and baking at temperatures
above 200 °C. As cleaning may be improved by exposure to a
higher temperature it may be necessary to run the oven at 250 °C
for 1 or 2 hours per week. Before carrying out such a heat cycle,
remove all oven equipment and make sure that you have cleaned
the unlined surfaces to prevent any soil from baking on. For isolat-
ed stubborn stains use a soft bush and very hot soapy water. -
Never use abrasive cleaners or scouring powders.
You can illuminate my oven for cleaning. To do this, turn my
oven control knob or my cooking method selector to the lamp po-
sition (1.
m Thorough cleaning
For thorough cleaning, you can remove various parts:
Warning! Isolate my oven from supply before replacing my
oven lamp.
To clean the glass cover or change my oven lamp the glass cover
_ can be taken off by turning it anti-clockwise.
Catalytic
Secondary
oven
Main oven
Oven
lighting
Cleaning the
lamp cover
or replacing
the oven lamp
21