Philips PM3208 Service Manual page 47

7 CORRECTIVE MAINTENANCE 7-5
7.2.6 Replacing the text plate
~ Remove the 4 screws from the bezel (fig. 7.5).
- Remove the bezel.
~ Remove all knobs. Some knobs are fixed by a screw; first remove the screw by means
of a hex screwdriver, size 1,5 mm.
- Remove the 4 screws from the plastic rim around the front (fig 7.3) and remove the
rim.
- Now, the text plate can be removed from the front plate by pulling it off; the text plate
has been fixed bv means of sticking-strip.
~ Now, a new text plate can be mounted.
- Replace knobs and bezel.
~ Check whether the knobs have been placed onto the shafts in the right position.
INTENS | POSITION
a
fee geste ——!
AmpL/ow See [TAME (ONT
SULE: FON. ay 4 ¥ fae
a
MATZ IOO
Figure 7.5 Removing text plate
7.2:-REMOVING AND REMOUNTING THE UNITS