Makita RBC220 Instruction Manual page 5

23. Use only replacement parts that are identical to original equipment parts when servicing the unit.
These parts are available from your dealer. The use of any other accessory or attachment may
create a potential hazard, injury to the user and damage to the machine.
24. Clean the machine completely, especially, the fuel tank cap, its surroundings, and the air cleaner.
25. When refueling, be sure to stop the engine and confirm that it is cooled down. Never refuel when
the engine is running or hot. When gasoline spills, be sure to wipe It up completely and properly
dispose of those materials before starting the engine.
26. Stay clear of other workers or bystanders.
27. Whenever approaching an operator of the machine, carefully call his attention and confirm that
the operator stops the engine. Be carful not to startle or distract the operator causing an unsafe
situation.
28. Never touch the nylon cutting head whenever the engine Is running. If it is necessary to adjust
the protector or nylon cutting head, be sure to stop the engine and confirm that the nylon cutting
head has stopped running.
29. The engine should be turned off when the machine is moved between work areas.
30. Be careful not to hit the nylon cutting head against stones, or the ground. Unreasonably rough
operation will shorten the life of the machine as well as create an unsafe environment for yourself
and those around you.
31. Pay attention to loosening and overheating of parts. If there is any abnormality of the machine,
stop operation immediately and check the machine carefully. If necessary, have the machine serviced
by a qualified service facility. Never continue to operate a machine which may be malfunctioning.
32. In startup or during operation of the engine, never touch hot parts such as the muffler, the high-
voltage wire or the spark plug.
33. For a while after the engine has stopped, the muffler Is still hot. Never place the machine in any
places where there are flammable materials (dry grass, etc.), combustible gasses or combustible
liquids.
34. Pay special attention to operation in the rain or just after the rain as the ground may be slippery.
35. If you slip or fall to the ground or into a hole, release the throttle lever immediately.
36. Be careful not to drop the machine or hit it against obstacles.
37. Before proceeding to adjust or repair the machine, be sure to stop the engine and detach the spark
plug cap from the spark plug.
38. When the machine is to be kept in storage for a long time, drain fuel from the fuel tank and carburetor,
clean the parts, move the machine to a safe place and confirm that the engine is cooled down.
39. Make periodic inspections to always assure safe and efficient operation. If you need a careful
inspection of your machine, please contact our agent or dealer.
40. Keep the machine well away from fire or sparks.
41. Warning: The cutter area is still dangerous while the machine is coasting to a stop.
42. Don't try to tackle a big job with an undersized machine.
43. Wear a dust mask in dusty work conditions.
44. Wear hearing protection during loud or extended periods of use.
45. Keep guards and protectors In place and in working order.
46. Never operate this machine while it is turned upside-down or when it is at an extreme angle.
CAUTION! CAUTION! CAUTION!
WHEN MIXING GASOLINE WITH TWO STROKE OIL, USE ONLY GASOLINE WHICH CONTAINS NO
ETHANOL OR METHANOL (TYPES OF ALCOHOL), THIS WILL HELP TO AVOID POSSIBLE DAMAGE
TO ENGINE FUEL LINES AND OTHER ENGINE PARTS.
SAVE THESE INSTRUCTIONS.
5