Makita RBC220 Instruction Manual page 16

STORAGE
1. When storing the machine for a long time, drain fuel from the fuel tank and carburetor as follows:
Drain all fuel from the fuel tank. Give a gentle push on the primer pump repeatedly until all fuel is expelled
out of the primer pump. Dispose of properly and in accordance with all local laws.
2. Remove the spark plug and add a few drops of oil into the spark plug hole. Then, pull the starter gently to
assure that an oil film coats the engine inside, then tighten the spark plug.
3. Clear or blow dirt or dust from the nylon cutting head and outside of engine, wipe them with a oil-immersed
cloth and store the machine in a dry location.
4. For RST250 only
Storage hanger (optional accessory) is convenient for hanging the machine to wall.