Error Messages; Command Use Precautions - Kenwood TS-870S Instruction Manual

Function _
FB Sets or reads VFO B frequency.
FD Reads RX filter dot display.
FR Sets RX (VFO A/B, memory channel).
FS Fine function (OFF/ON)
FT Sets TX (VFO A/B, memory channel).
FW Sets or reads filter bandwidth. For SSB
and AM, sets or reads the high-pass filter
cutoff frequency.
GT Sets or reads AGC time constant.
iD) Reads model number of the transceiver.
IE Reads status of the transceiver.
1S Sets or reads IF shift. For SSB and AM,
sets or reads the low-pass filter cut-off
frequency.
KY Converts input characters into Marse
code.
LK Sets or reads Lock (OFF/ON).
LM DRS recording
MC Sets or reads memory channels.
MD Sets or reads modes.
Function
RM Selects a meter function or reads
meter values.
RT Sets or reads RIT (OFF/ON)}.
RU Raises RIT frequency.
RX | Selects receive mode.
sc Sets or reads Scan (OFF/ON).
SD Sets or reads Semi Break-in delay time.
SM |S-meter and TX RF meter readings
SQ! Sets or reads squelch level.
SR Resets the transceiver.
TX Selects transmit mode.
UP MIC UP function
VD Sets or reads VOX delay time.
VR | Triggers the Voice Synthesizer for
message output.
VX | Sets VOX (OFF/ON).
XT Sets or reads XIT (OFF/ON).
ERROR MESSAGES
PL Sets or reads Speech Processor level.
PR Sets ar reads Speech Processor
(OFF/ON).
PS __| Sets or reads power (OFF/ON).
RA Sets or reads RF ATT (attenuator).
RG Clears RIT frequency.
RD __| Lowers RIT frequency.
RG | Sets or reads RF gain.
86
COMMAND USE PRECAUTIONS