Group Scan; Memory Channel Lockout - Kenwood TS-870S Instruction Manual

10 SCAN
GROUP SCAN
* The squelch must be closed before scanning
starts.
Press [SCAN] to start scanning.
6 To stop scanning, press [SCAN], or [CLR],
or [SEND], or Mic [PTT].
MEMORY CHANNEL LOCKOUT
1 Press [RX M.CH] to select Memory Recall.
2 Select the memory channel to be locked out.
10 3 Press [CLR].
+ Release [CLR] immediately since pressing it for
more than about 2 seconds erases the contents
of the memory channel.
+ Adot lights beside the right-most digit of the
memory channel number to indicate the channel
has been locked out.
sant = aac Auto
bal McH
Pa 1/1900
+ Repeatedly pressing [CLR] adds and removes
the channel from the scan list.
62
7: Program Scan_
"Memory Scan'
"(sec/10 kHz) ©
Weight Value =
Ss
(Pay
"© (sec/ channel)
"MENU No. 67 is OFF
Program Scan:
Memory Scan:
1 Select OFF for Menu No. 67 (BSY.STOP).
2 Press [SCAN] to start the Memory Scan function.
3 Turn the RIT/XIT control to select the desired weight
value.