Pioneer LaserDisc CLD-2850 Operating Instructions Manual page 18

Cd cdv ld player
Hide thumbs Also See for LaserDisc CLD-2850:
Table of Contents

Advertisement

DISPLAY SWITCHING
SYSTEM button
SYSTEM
Gs
Use this button to change mode according to the type of TV
and disc to be used.
When
playing an NTSC disc, press SYSTEM to switch the
mode according to the TV system
The mode changes according to the following table:
DISC
Ww
PAL
NTSC
|
___ [MoE
j
size___fcovoua
jsze
|
PAL |
FULL
| BLackwuire | STRETCH
Ntsc | NTSC
BLACKMWHITE
"SHRINK | COLOUR
|FULL
| Mop PAL | COLOUR
* SHRINK | SLACKMWHITE | FULL
@
Inthis table, "SHRINK" in the size column means that the
screen shrinks in vertical direction; "STRETCH"
means
that the screen stretches approximately 120% in vertical
direction; and "FULL" means normal size.
@
InMOD. PAL mode, the colour of the background is black
when the power is turned on or NTSC system discs are
played.
In NTSC mode or PAL mode, the colour of the background
is blue.
When using wide aspect type TV and playback squeezed LD
NOTES:
#SHRINK
Most models of the newly developed countdown PAL TV
system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically
switch vertical amplitude, resulting in a display without
vertical shrinkage.
ff your PAL TV does
not have 2 V-Hold control, you may not
be able to view NTSC disc because the picture may roll. If
the TV has a V-Hold control, adjust it until the picture stops
rolling.
On some
TVs, the picture may shrink vertically,
leaving black bands at the top and bottom of the screen.
This is not a malfunction; it is caused by the NTSC ~» PAL
conversion.
Wide aspect type TV
|
Front panel
|
L
16:9
|
ve:
Remote control unit
During playback, press the 16:9 button.
With discs of the squeezed
LD, the picture is expanded
suitable for the wide aspect type TV.
18
<VRB1086>
NOTES:
On general screen
(4:3) TV, with discs of the squeezed
LD, the picture is shrinked horizontally.
This function is carried
out only when the AV CONNECTOR
terminalis connected.
When only the VIDEO OUT jack is
connected, this function is not carried out.
When general screen {4:3) TV is connected to the AV
CONNECTOR
terminal and the 16:9 button is pressed
during playback, the input mode of the TV will change
{such as TV tuner etc.}.

Advertisement

Table of Contents
loading

Table of Contents