Table of Contents
Advertisement
Quick Links
@) PIONEER
The Art of Entertainment
CLD-2730K. me
CD CDV LD PLAYER
REPRODUCTOR
DE CD, CDV Y LD
CD, CDV, LD #851n344
Operating Instructions
Manual de instrucciones
BARAE
SPARE PARTS MASTER
CEES ODGCSCHSOe
TBaSaaeGeeae
® This player is not suitable for commercial use.
@ LD-ROM,
CD-ROM
and CD graphic discs cannot
be
played with this player.
Thank you for buying this Pioneer product.
Please read through these operating instructions so you
will know how to operate your model properly.
After you
have finished reading the instructions, put them away in a
safe place for future reference.
In some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown in
the explanatory
drawings.
However,
the method
of
connecting and operating the unit is the same.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD,
DO
NOT
EXPOSE
THIS
APPLIANCE
TO
RAIN
OR
MOISTURE.
IMPORTANT NOTICE
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed
warranty card and keep it in a secure area. This is for your
security.
CAUTION:
This product satisfies FCC regulations when
shielded cables and connectors are used to connect the
unit to other equipment.
To prevent electromagnetic
interference with electric appliances such as radios and
televisions,
use shielded
cables and connectors
for
connections.
THE POWER SWITCH IS SECONDARY CONNECTED AND
THEREFORE DOES NOT SEPARATE THE UNIT FROM
MAINS POWER IN STANDBY POSITION.
English
Espafiol
peas
LaserDise
LaserMaracke
Ll'
LASER DISC
aise
DIGITAL AUDIO
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage models are provided with this switch.
U.S., Canadian, European, U.K., and Australian models
are not provided with this switch.
The line voltage selector switch is located on the rear panel of
this player. Before your player is shipped from the factory, the
switch is set to the power requirements of the player's
destination. Check that it is set properly before plugging the
power cord into the outlet. If the voltage is not properly set or
if you move to an area where the voltage requirements differ,
adjust the selector switch as follows:
Use a medium-sized (flat blade) screwdriver. Insert the tip of
the screwdriver into the groove of the selector switch and turn
it to set the player to the power voltage of your area.
VOLTAGE
SELECTOR
Set the selector so that arrow
points to power voltage of your
area (Figure shows arrow pointing
to 220 - 240 volts.)
Advertisement
Table of Contents
