Resetting All Remote Control Codes - Yamaha HTR-6040 Owner's Manual

Resetting all remote control codes

Use this feature to clear all the remote control codes
previously set and reset all of them to the initial factory
settings.
1
Press U CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
CODE SET TRANSMIT
POWER POWER STANDBY POWER
TV AV
2
Press the numeric buttons to enter the code
number "9981".
The TRANSMIT indicator on the remote control
flashes twice, and all the remote control codes
previously set are cleared and reset to the initial
factory settings.
MUSIC ENTERTAIN MODE STEREO
1 2 3 4
ENHANCER STRAIGHT DIRECT ST.
5 6 7 8
SUR. DECODE NIGHT
9 0
y
If you do not press any buttons within 30 seconds after step 2, the
clearing process is canceled. In this case, repeat the clearing
procedure.
TRANSMIT
Flashes
TRANSMIT
Flashes
Remote control features
63
En