Resetting All Remote Control Codes - Yamaha HTR-N5060 Owner's Manual

Resetting all remote control codes

Use this feature to clear all the remote control codes
previously set and reset all of them to the initial factory
settings.
1
Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
CODE SET
2
Press the numeric buttons to enter the code
number "9981".
The TRANSMIT indicator on the remote control
flashes twice, and all the remote control codes
previously set are cleared and reset to the initial
factory settings.
STEREO MUSIC ENTERTAIN MOVIE
1 2 3
DIRECT ST.
STANDARD SELECT EXTD SUR.
5 6 7
SPEAKERS ENHANCER NIGHT STRAIGHT
9 0 10
EFFECT
y
If you do not press any buttons within 30 seconds after step
2, the clearing process is canceled. In this case, repeat the
clearing procedure.
TRANSMIT
Flashes
4
TRANSMIT
8
Flashes
ENT.
REMOTE CONTROL FEATURES
87
En