What To Do If - AEG COMPETENCE 2040B Instruction Book

Build-in conventional single oven

Hide thumbs Also See for COMPETENCE 2040B:

What to do if... (something goes wrong?)

Faults you

can rectify

yourself

... the pilot lamps do not show?

... the oven does not heat?

1. All the relevanl switches may not have been operated.

2. The fuse in the fuse box hay have blown.

3. IMPORTANT - Make sure that the oven door is closed

completely.

... the fuses keep blowing?

Please call an approved and qualified electrician.

... the oven lamp fails?

See cleaning stnd care on page 13.

Replacement lamps are not covered by warranty and are

not free of charge.

... the oven cannot be switched on?

Check whether the symbol 0£] is Hashing. If It is, press button

g§

or [©j. Select the correct time of day If necessary.

Please make sure that you are not able to rectify a fault

yourself before calling a service engineer in connection

with any of these problems. The cost of calling out an engi-

near will not be covered by die warranty.

Therefore, be sure to follow very carefully the instructions

in this booklet and any additional information which may

accompany this appliance.

AEG electrical appliances comply with current safety reg-

glations. Repairs should only be carried out by a qualified

AEG engineer or AEG appointed service agents. Repairs

carried out by unauthorised personnel could lead to dam-

age and could pose a considerable safety hazard to the

user.

Table of Contents