Table of Contents
Advertisement
Available languages
Available languages
4.
E N G L I S H
IMPORTANT
B Only use the power plug and the charging stand provided
to charge the razor.
B The power plug transforms 100-240 AC volts to
12 volts DC.
B An adaptor plug may be necessary for cord usage in
some foreign countries.Your new razor will automatically
convert internally to work on 100V to 240V AC/DC
systems.
CHARGING
B Charging or recharging at temperatures below 40ºF or
higher than 95ºF adversely affects lifetime of batteries.
B Battery Performance is best if you recharge only when
batteries are (almost) completely empty.
1
Connect the small plug into the charging stand and put
the power plug into any 100V to 240V AC/DC outlet.
Use only the cord and stand provided.
2
Place the razor in the charging stand.
3
First time charging and recharging after non-use for
1 month or more requires a full 16 hours.
RECHARGING
B First time charging requires 16 hours.
B After initial charge, recharging normally takes 8 hours.
B A fully charged razor has cordless shaving time of up
to approx.40 minutes.Return razor to charging stand
after shaving.
INSERTING THE FIRST CARTRIDGE
1
Take one lotion or gel cartridge.Take the connector
supplied and remove it from the little bag.Push it into
the plastic cap of cartridge until it locks into position
with a click.
2
Push the release slide on the back of razor downwards
and open the co ver of the cartridge compartment.
3
Slide the cartridge with the connector in place into the
razor. It only fits properly if the white side of the
connector is pointing upwards.Close the cover.
4
Press the applicator button a few times until the Nivea
for Men shaving lotion or gel appears.The razor is now
ready for use.
REPLACING CARTRIDGES
1
Open back cover of razor.
2
Remove empty cartridge, pull out and save the
connector. DO NOT discard the connector.
3
Rinse out cartridge compartment with water before
replacing cartridge. Air dry thoroughly.
E N G L I S H
5.
Advertisement
Chapters
Table of Contents
