Using The Hdmi™ Control Function - Yamaha YHT-S400 Owner's Manual

Using the HDMI™ control
function
You can operate the following functions of this system
with the remote control of your TV when the TV
(HDMI control function supported) is connected to the
HDMI OUT jack of this system.
• Turning this system on or to standby mode
(conjunction with TV)
• Adjusting the volume
• Selecting a device to reproduce TV sounds (this
unit or TV)
y
• Even if your TV supports the HDMI control function,
some functions may not be available. For details, refer to
the instruction manual supplied with your TV.
• If you connect this system and Blu-ray disc player or DVD
player (HDMI control function supported) to HDMI, you
can also control those devices with the HDMI control
function. For details, refer to the instruction manual
supplied with each device.
• We suggest that you use products (TV, Blu-ray disc/DVD
player, etc.) from the same manufacturer.
• The HDMI control-compatible components include
Panasonic VIERA Link compatible TV, DVD player/
recorder and Blu-ray disc player.
• When "HDMI CONTROL" is set to "ON", operations of
the TV (for example, changing channels, etc.) may change
the system settings, such as the surround mode.
(Steps 1 through 3 are required for the HDMI
control function setup.)
1
Turn on all devices connected to this
system with HDMI.
2
Enable the HDMI control function on each
device.
For this system, set "HDMI CONTROL" to "ON"
(☞ P. 21).
For external devices, refer to the instruction
manual supplied with each device.
3
Turn off the TV, and then turn it on again.
(Step 4 through 6 are required for making the
TV learn linked devices. If the connections or
devices are switched, you need to carry out
these steps again.)
4
Select this system as the input source of
the TV.
5
Turn on the HDMI control device (Blu-ray
disc or DVD player) connected to this
system.
6
Select the HDMI control device (Blu-ray
disc or DVD player) as the input source of
this system to check the video input.
7
Check if the HDMI control function works
(turn on this system or adjust the volume
level using the remote control of the TV).
Note
In case the HDMI control function does not work, check the
followings. Also turning off (unplug) and turning on (plug)
the TV may be effective.
– The TV is connected to the HDMI OUT jack of this
system
– "HDMI CONTROL" is set to "ON" on this system.
– The HDMI control function is enabled on the TV.
When "HDMI CONTROL" is set to "ON", even if
you press , the system will not be completely
turned off and the signal from HDMI input terminal
to HDMI output terminal is output.
y
• The STATUS indicator in the front panel display lights
red when "HDMI CONTROL" is set to "ON" and the
system is in standby mode.
• Before pressing , select desired input sources
connected to HDMI input (HDMI IN 1 to 3).
Setup menu
23
En